This page provides an overview of how to navigate using CommCare Android, describes different types of settings you can consider, and presents question types that are only available on CommCare.
This guide assumes that you have already installed CommCare or are going to be building an application for CommCare. The screenshots on this page are from CommCare 2.50.2 You may be interested in the below information about CommCare (for Android) as well:
Android Phone Setup - Installing CommCare on an Android Device, including GPRS settings, CommCare installation steps and usability settings on the device
Install CommCare for Android Smartphones - Installation steps for CommCare, with visuals
CommCare Home Screen Shortcuts - Helpful settings for users
CommCare Form Management Features - Understand the different CommCare features to help manage forms on the device
One major decision in how to configure CommCare is Sense Mode. Sense Mode, when turned on, disables advanced features that may be confusing to new users, especially form management. Below, those features which are disabled in Sense Mode are indicated. More detail can be found on the page about CommCare for low-literate users.
Getting to Know CommCare for Android Smartphones
There are some tricks to effectively navigating in CommCare, and some features that are not easy to find. Below are some of the key features you may find useful.
Your Android Device
There may be a number of buttons on your Android device, but as pictured below there are three buttons that are important for using CommCare.
Menu Key: The Menu key usually looks as pictured above, but may also look like three dots stacked vertically. This button is used to access settings and menus.
Home Key: This button will bring you back to the phone's home screen.
Back Key: Is used to return to the previous screen.
Navigating in CommCare for Android Smartphones
Getting Started
You can log into CommCare for Android as a Mobile User or as a Demo User.
Logging in as a Mobile User
After clicking on the CommCare icon, you will reach the log-in screen. Here you will need to enter a username and password (see left image).
You can get information on how to create and manager users here. Please note the following:
The first time you "Log In" you must have internet connectivity. After pressing “Log In” for the first time, there will be a few moments during which CommCare makes sure that the information on your phone is up-to-date with the server (see right image)
After you log in the first time, even if you log out and then log back in (with the same username) you do NOT need internet connectivity.
The username of the last user to log in will remain in the “username” box, even after logging out.
Logging in as a Demo User
There is a demo mode- to enter demo mode you only need to click on the three dots and select "Enter Practice Mode" as shown in the left image. After selecting it you will see a warning message.
The Home Screen
The main screen (“home screen”) of CommCare has several important features clearly visible.
Start: This is where your users will go in order to access the forms and submit data.
Sync with Server: forces to phone to synchronize with data on the server. The text below the button will tell you if there are pending forms. If there are a lot of pending forms the text will turn red to alert the user. If you have forms you want to force the phone to submit, you can press “sync with server.” However, you will have to press it again after the forms have been submitted in order to actually sync and for the “last synced” time and date to update.
Log Out of CommCare: Logs the user out so that the data on the phone is secure.
You can translate many parts of the home screen into most languages. See our page on user-interface translations to learn more.
Home Screen Settings
LEFT: If you click on the menu button on your phone (often looks like three dots) you will access the home page settings menu:
Settings allows you to access some advanced tools (see next slide)
Update CommCare tells the device to check CommCare HQ to see if there is a more recent starred build. If there is, CommCare will update (connectivity required) and you will need to log-in again.
About CommCare provides some legal info about CommCare
MIDDLE: Settings- After selecting “settings” you will see a number of options. In general it should not be necessary to use these without help from a CommCare HQ/Dimagi representative.
RIGHT: Advanced- Click on Advanced option from the main menu (the three dot on the top right hand side), you will see some advanced options
Clear User Data: if you choose this, it will delete all of the current users’ data and bring you back to the log-in screen.
Force Log Submission forces CommCare to submit technical metadata to the server. This can be useful to the software team when troubleshooting problems. A CommCare team member could request you to do this if there is a recurring bug in the software.
Form Management
Within the "saved" forms button you can find a list of all forms that were submitted since the last time the application data was cleared. You can further filter this list by submitted forms, unsent forms, or incomplete forms. After you "save a form as complete" it is tagged as "unsent" until CommCare confirms that the form has reached the CommCare HQ server, at which time the tag is removed.
More details on all of the form management features can be found here.
Navigation Within Forms
When you open a form you will get the landing screen (left) that shows users how to navigate within a form by swiping the page. When you try to skip a required question, or enter a value that is outside of the permitted range, a message will alert you that you must correct your answer. If you press the three dots at top right-hand side, you will see three advanced options displayed on the screen:
Go To Prompt
Change Language
Change Settings
Progress Bar: Progress bar on the top of the screen shows how far you have reached in the form.
Advanced Menu Options
Go To Prompt calls up a list of all the questions/labels in the form. If you have already entered values they will be displayed below the question text.
You can scroll up and down to review your answers, and is the preferred way to quickly review a form prior to submitting.
You can click on any question in order to go directly to it and update/enter a value
Go To Start brings you to the first page of the form, and Go To End brings you to the last page where you can submit the form
Go Up is only applicable in repeats.
Change Language allows you to toggle between the display text languages.
Choosing Settings presents two additional options:
Form Settings
Settings includes the following options:
Text Font Size for changing the size of the display text. You only have to do this once in an app and all forms will default to the text size you have chosen
Display Rich Inline
Exiting a Form
Within a Form:
When you hit the “back” button in a form you are working on, you will get two options
STAY IN FORM: brings you back to the form you were working on
EXIT WITHOUT SAVING: deletes any changes you made/data you entered and brings you back to the home screen
SAVE AS INCOMPLETE FORM:
End of a Form:
On the last page of a form there will be a button called "FINISH" if you click the form it will save the form and exit. After clicking on "FINISH” you will see a message stating whether or not your form was successfully completed.
Common Question Types
This section goes through some common question types to show how they will appear on the phone.
Labels
Labels are used to display messages. The message can be changed or translated through the User Interface Translations.
Text or Numeric Input
Text questions will appear with an alphabetic keyboard by default, while all numeric questions will display a number pad.
Single Select
Single select questions are fairly easy- you simply select the desired option and the circle will show as filled. If you hold you finger continuously on an option you will get a pop-up screen that says "Edit Prompt: Remove Response." If, for example, you accidentally answered a question that you wanted to leave blank, you can remove your choice through the "remove response" tool. It is also common for users to "accidentally" get the remove response message by holding their finger too long when selecting an option.
Multiple Choice
In Multiple Choice questions you can select more than one option, which is usually indicated by square boxes. You can create useful constraint messages as well.
Date and Time Questions
You can ask for a date, time, or a combination of date and time. You can use the up/down arrows to adjust the values. Time values are always shown in a 24 hour clock.
Special Question Types
Media Capture (Image, Audio, Video)
CommCare for Android can be used to take capture or upload images, audio, or video to a form.
CommCare cannot accept large image files. Anything greater than 1MB could cause issues including slow syncing and failure to upload the picture to CCHQ. The best rule of thumb is to use a small (< 1MB) file size when taking pictures within CC. VGA files seem to work particularly well. You may have to manually adjust this in your camera app if you prefer to take larger size pictures outside of CommCare. If you are looking at a report in CCHQ and you either can't find an image you know you captured, or you see an image file name but it is not linked to anything, make sure that you did not take a very large image that could not be submitted over the network.
When you get to a screen with a media capture question you will have the option of either capturing the data in real time (i.e. opening a camera app to take a picture) or choosing a file from you phone (i.e. navigating to a folder on your device to find a specific file).
Signature Capture
The Signature Catpure question type can be used to capture a client's signature and send it to the CommCare HQ server. It can then be accessed as an image file in the form submission report from the attachments tab. Clicking on Gather Signature will open a screen where you can write a signature with your finger or a stylus. Then choose Save and Close to capture the signature. You can replace it by clicking on Gather Signature again.
GPS Question
When you reach a GPS question, the user will be presented with a "Record Location" button. Upon selecting the button, a loading screen will indicate the accuracy of the GPS coordinates. A spinning circle icon will be displayed while the devices searches for the location, and is replaced by a green check mark when the location is locked in. When accuracy gets to 5 m the coordinates will automatically be captured and displayed on the screen. If you do not need such high accuracy, you can record the location earlier. Once the location is displayed in your form, you simply swipe to go on to the next screen. Selecting "Record Location" again will re-initiate the GPS capture process and can overwrite the first set of coordinates.
The first time you try to do a GPS capture in a new location it can take a long time to find the location, sometimes as much as 10 minutes. Subsequent captures will likely be much faster.
Barcode Question
The barcode question will call out to a barcode scanner application to capture data stored in an external barcode.
Android App Call Out
In CommCare you can call out to a different Android application to get an input. Instructions are at Integrating your custom Android applications with CommCare.
Case List and Details
In CommCare case list view it is important not to put too much text or data in the case list as this will make it very difficult to navigate through the case list. Below you can see examples of a case list (left) and case details (right). Click here for more information on case lists.
Special Formatting and Tools
This section describes formatting and question types that are specific to CommCare for Android
Using Multimedia (Images, Audio) in Your App
For instructions on how to use and install multimedia in CommCare click here. When you add an audio or video file you can play it by selecting the button in the upper right-hand corner. Clicking on the button will start playing the file, and you can press it again to pause the playback.
Generating a QR code in your form
In the place of an image, a question can be configured to display a QR code which contains text that is dynamically set in the form.
To configure a question to display a QR code in the Form Builder, find Add Other under the question's Content header, and click "custom". When prompted for a content type, enter qrcode, then enter the text you want to be encoded in the QR code into the new label.
If you want the code to contain data from the form (like a case ID or a computed value), you can use advanced <output> features as outlined in the Hidden Value Calculations Tutorial. You can test the content by displaying it first in a question's normal label if needed.
This feature is only available in CommCare 2.8 or higher.
Hint Text
In CommCare you can use "hint text" which will appear in a smaller font underneath your display text. To add hint text in the app builder, open the "Advanced Properties" tab and put your text in the "hint" field.
Question List
You can group questions on one screen by putting all of the relevant questions in a "Question List" group. This group type is available in the Form Builder under the Group set of question types. Note that you cannot run a calculation within a screen (i.e. you cannot have the outcome of a question at the top of a screen affect the display condition of one on the bottom of the same screen).
Frequently Asked Questions
Q: Can you group questions horizontally to improve display on a tablet?
A: No, this is not possible at present
Q: How do you change the font in CommCare for Android?
A: You can adjust the font by pushing the settings button while inside any form. Once you change the font size one time from within any form, CommCare will remember the new font size and display it in all other forms. You can make the menu text larger by changing your phone's font settings (Settings -> Display -> Font Size)
Q: Can I have more than one CommCare app on my phone at the same time?
A: No, you cannot have more than one app on Android devices. This is on the CommCare development plan but there is no time estimate at present.
Q: When using the signature question type I notice that a copy of the signature is saved to the phone's gallery. Is there any way to prevent this or to encrypt the image?
A: Unfortunately neither of these is possible within CommCare at the moment. You can tell Android that you don't want media in a certain folder being indexed by adding a file called .nomedia to that folder (read more here). However, you'd have to do this yourself - enter CommCare's domained folder on the SD card and add this file either via USB or an Android text editor app. Its also worth noting that this is basically a voluntary opt out that "well behaved" applications will respect, but are not forced to.